Call Now: (866) 928-6611

The Best Water Heater Service in Stevens County, WA

Call Now for Water Heater Service:

Water Heaters in Stevens County

Lowest Cost Stevens County Water Heater Repair & Installation

Aptera's professional, experienced pros can tackle any issue with your water heater in Stevens County with quick repairs or replacement units. When your water goes cold, you see discolored water from the tap or hear clanking sounds from your heater, our experts are ready with same day water heater repair in Stevens County for both businesses and homeowners. Get started now or read below to see what it takes to become an Aptera partner and learn more.

At one point or another, burned out elements, sediment buildup, faulty thermostats, defective thermocouple, blocked vents, dip tube damage or a broken pressure relief valve will have you calling a repairman. Proper care, maintenance and selecting the right unit for your property all help reduce these occurrences. Aptera phone screened professionals are trained for every type of repair needed for all major brands and are ready 7 days a week.

Call Now for Pricing

Comparing Types of Water Heaters in Colville, Loon Lake and Chewelah, WA

Recent changes in the National Appliance Energy Conservation Act have increased the energy efficiency standards for residential water heating with gas, oil or electricity—meaning new water heaters will produce hot water using fewer resources. In addition to improvements made to models with conventional water storage tanks, consumers also have solar-powered, tankless, and combination space heater/water heater models to consider.

Conventional Storage Tank Water Heaters

Conventional water heaters act as a holding tank for heated water. Cold water flows into the tank and is heated by the fuel source (usually gas or electric). The water sits in the tank where it is monitored by a thermostat and kept hot until there is a call for it from a connected tap.

ProsCons
  • Multiple fuel options
  • Initial purchase is affordable
  • Simple design is easy to repair or replace
  • Wasted energy due to standby heating
  • Storage tank can be large/bulky
  • Lifespan shorter than tankless heaters

Fuel Type and Energy Efficiency

Conventional water heaters are most often fueled by natural gas or electricity. Models that utilize natural gas are less expensive to operate. LP and oil-fueled models are also available. Conventional models must meet the new EF (Energy Factor) standard of .62 or above, depending on the tank size and fuel source.

On Demand/Tankless Water Heaters in Stevens County

In a tankless unit, water is heated by electric coils or a gas burner as it moves through the heat exchanger.

ProsCons
  • Small size gives more installation options
  • Can last up to twice as long as a conventional model
  • Less wasted energy, only heating minimum amount of water necessary
  • Difficult to heat water for 3+ taps at once
  • Initial investment is higher than conventional models

Fuel Type and Energy Efficiency

Tankless models, like their traditional counterpart, can be fueled by natural gas, LP gas, oil, or electric. These models have an EF standard of .82 or greater.

Solar Water Heater

Using the sun’s natural rays absorbed by roof mounted panels as a power source, solar water heaters in Stevens County are the most environmentally friendly option available. Electricity from the power grid acts as a back-up so you never go without hot water.

solar water heater diagram
ProsCons
  • Free to operate, weather permitting
  • Gas or electric is used less often to heat water (backup only), resulting in lower bills
  • Most expensive upfront costs
  • Repairs and maintenance for “extra” parts could be costly

Fuel Type and Energy Efficiency

The SEF (Solar Energy Factor) standard is equal to or greater than 1.2 for a natural gas backup unit, 1.8 for an electric backup unit.

Coil Space Heater/Water Heater Combinations

Combination units use the heat produced by the home’s space heating system and a heat exchanger to produce hot water. Hot water is stored in a tank until there is a call from the tap.

ProsCons
    High efficiency units could lower monthly bills Multiple fuel options
  • Installation is lengthier/more complicated
  • Retrofitting could be costly

Fuel Type and Energy Efficiency

Working in combination with your home’s heating space heating source, both units utilize the same fuel. The EF standards are similar to traditional tank units; however, because most combination heaters are high-efficiency they will likely exceed the rated EF standards.

How To Get the Best Water Heater Contractor in Colville, Loon Lake and Chewelah

When your home has no hot water, your instinct is to work with the contractor who can get to you the fastest. However, taking just a few minutes to find the pro who asks questions, listens to your answers and educates you on your options will save time, money and headaches.

corroded water heater

You Ask We Answer

How Often Do I Need Service?

Regular inspections and annual flushing can prevent sudden, costly repairs.

It is Making a Lot of Noise But is Still Functioning, Do I Need to Worry Right Now?

This is usually an indication of sediment in the water tank. While you may still have hot water, it is not running as efficiently as it could. Having the tank drained and serviced will improve efficiency and could extend the life of your heater.

Does a Leaking Water Heater Have to be Replaced?

Yes, in most cases a leaking tank means cannot be patched. If a loose fitting is causing the leak however, it might be repairable.

How Long Will My Water Heater Last?

Depending on the model, most will last between 6 and 15 years, though 20 years is not uncommon with regular maintenance and parts replacement.

What Does the Warranty Cover?

This varies by manufacturer, but typically the warranty includes all parts and labor to repair or replace defective parts for the first full year from the date of installation. After the first year, the warranty usually provides coverage for the replacement of defective parts, but does not pay for the labor associated with installing the parts.

Are You Insured?

Liability insurance and workers’ compensation policies protect you from financial obligations stemming from damages or injuries that may occur while a contractor is working on your project. Ask the contractor for a certificate of insurance with you listed as the additional insured (your contractor can obtain this from the insurance agency at no additional cost).

Is a Permit Required For a New Installation?

Yes you need a permit to ensure installation is up to the municipality’s building codes. Aptera installation experts will explain the permit process and obtain the proper permit for you.

Tips for Reducing Your Water Heating Costs

Monthly heating costs can vary greatly depending on the age and model of your water heater, the fuel source used and the amount of hot water you use each day. Reduce waste and your costs by following the guidelines below:

For more details on energy efficiency requirements go to the US Department of Energy www1.eere.energy.gov/buildings/appliance_standards or the PHCC.

Stevens County Cities Served

Water Heaters Colville, WA

Colville Water Heaters Costs:

Colville water heater installation costs $1,136, water heater repair costs $665.

Water Heaters Loon Lake, WA

Loon Lake Water Heaters Costs:

Loon Lake water heater installation costs $873, water heater repair costs $511.

Water Heaters Chewelah, WA

Chewelah Water Heaters Costs:

Chewelah water heater installation costs $1,073, water heater repair costs $628.

Water Heaters Valley, WA

Valley Water Heaters Costs:

Valley water heater installation costs $1,136, water heater repair costs $665.

Water Heaters Kettle Falls, WA

Kettle Falls Water Heaters Costs:

Kettle Falls water heater installation costs $921, water heater repair costs $539.

Water Heaters Fruitland, WA

Fruitland Water Heaters Costs:

Fruitland water heater installation costs $996, water heater repair costs $583.

Water Heaters Evans, WA

Evans Water Heaters Costs:

Evans water heater installation costs $955, water heater repair costs $559.

Water Heaters Clayton, WA

Clayton Water Heaters Costs:

Clayton water heater installation costs $1,067, water heater repair costs $625.

Water Heaters Addy, WA

Addy Water Heaters Costs:

Addy water heater installation costs $889, water heater repair costs $520.

Water Heaters Ford, WA

Ford Water Heaters Costs:

Ford water heater installation costs $969, water heater repair costs $568.

99013 | 99034 | 99040 | 99101 | 99109 | 99110 | 99114 | 99126 | 99129 | 99131 | 99137 | 99141 | 99148 | 99151 | 99157 | 99167 | 99173 | 99181 |

Water Heater Installation in Stevens County, WA

Water Heater Installation Stevens County, WA

Water Heater Repair in Stevens County, WA

Water Heater Repair Stevens County, WA

Tankless Water Heater Installation in Stevens County, WA

Tankless Water Heater Installation Stevens County, WA

Get Pricing on Water Heaters in Stevens County, WA

Stevens County Water Heater Installation

Water Heater Installation in Stevens County

Average Cost: $1,091
Starting At: $539

Show Less

CityAvg. CostLow CostHigh Cost
Addy $889$442$1,514
Chewelah $1,073$568$1,554
Clayton $1,067$529$1,638
Colville $1,136$449$1,424
Evans $955$549$1,745
Ford $969$445$1,629
Fruitland $996$565$1,423
Gifford $975$481$1,581
Hunters $993$546$1,714
Kettle Falls $921$537$1,362
Loon Lake $873$484$1,463
Marcus $1,100$485$1,787
Northport $1,129$507$1,450
Rice $1,064$564$1,655
Springdale $948$541$1,385
Tumtum $985$560$1,593
Valley $1,136$488$1,795
Wellpinit $1,123$500$1,453
Stevens County Water Heater Repair

Water Heater Repair in Stevens County

Average Cost: $639
Starting At: $148

Show Less

CityAvg. CostLow CostHigh Cost
Addy $520$121$1,124
Chewelah $628$156$1,154
Clayton $625$145$1,217
Colville $665$124$1,058
Evans $559$151$1,297
Ford $568$122$1,210
Fruitland $583$155$1,057
Gifford $571$132$1,174
Hunters $581$150$1,273
Kettle Falls $539$148$1,012
Loon Lake $511$133$1,087
Marcus $644$133$1,328
Northport $661$139$1,077
Rice $623$155$1,230
Springdale $555$149$1,029
Tumtum $577$154$1,184
Valley $665$134$1,333
Wellpinit $658$137$1,079
Stevens County Tankless Water Heater Installation

Tankless Water Heater Installation in Stevens County

Average Cost: $1,290
Starting At: $314

Show Less

CityAvg. CostLow CostHigh Cost
Addy $1,051$257$2,849
Chewelah $1,269$331$2,925
Clayton $1,261$308$3,085
Colville $1,343$262$2,681
Evans $1,129$320$3,286
Ford $1,146$259$3,067
Fruitland $1,177$329$2,678
Gifford $1,152$280$2,976
Hunters $1,173$319$3,227
Kettle Falls $1,089$313$2,564
Loon Lake $1,032$282$2,754
Marcus $1,300$282$3,365
Northport $1,334$296$2,731
Rice $1,258$329$3,116
Springdale $1,121$316$2,608
Tumtum $1,165$326$3,000
Valley $1,342$285$3,379
Wellpinit $1,328$291$2,735
Stevens County Solar Water Heater Installation

Solar Water Heater Installation in Stevens County

Average Cost: $1,330
Starting At: $318

Show Less

CityAvg. CostLow CostHigh Cost
Addy $1,084$261$3,216
Chewelah $1,309$335$3,301
Clayton $1,301$313$3,482
Colville $1,386$265$3,027
Evans $1,165$324$3,709
Ford $1,182$263$3,462
Fruitland $1,214$333$3,023
Gifford $1,189$284$3,359
Hunters $1,210$323$3,643
Kettle Falls $1,123$317$2,894
Loon Lake $1,065$286$3,109
Marcus $1,341$286$3,798
Northport $1,376$300$3,082
Rice $1,298$333$3,518
Springdale $1,156$320$2,943
Tumtum $1,201$331$3,386
Valley $1,385$288$3,814
Wellpinit $1,370$295$3,088