Call Now: (866) 928-6611

The Best Water Heater Service in Pike County, KY

Call Now for Water Heater Service:

Water Heaters in Pike County

Lowest Cost Pike County Water Heater Repair & Installation

Aptera's professional, experienced pros can tackle any issue with your water heater in Pike County with quick repairs or replacement units. When your water goes cold, you see discolored water from the tap or hear clanking sounds from your heater, our experts are ready with same day water heater repair in Pike County for both businesses and homeowners. Get started now or read below to see what it takes to become an Aptera partner and learn more.

At one point or another, burned out elements, sediment buildup, faulty thermostats, defective thermocouple, blocked vents, dip tube damage or a broken pressure relief valve will have you calling a repairman. Proper care, maintenance and selecting the right unit for your property all help reduce these occurrences. Aptera phone screened professionals are trained for every type of repair needed for all major brands and are ready 7 days a week.

Call Now for Pricing

Comparing Types of Water Heaters in Pikeville, Virgie and Shelbiana, KY

Recent changes in the National Appliance Energy Conservation Act have increased the energy efficiency standards for residential water heating with gas, oil or electricity—meaning new water heaters will produce hot water using fewer resources. In addition to improvements made to models with conventional water storage tanks, consumers also have solar-powered, tankless, and combination space heater/water heater models to consider.

Conventional Storage Tank Water Heaters

Conventional water heaters act as a holding tank for heated water. Cold water flows into the tank and is heated by the fuel source (usually gas or electric). The water sits in the tank where it is monitored by a thermostat and kept hot until there is a call for it from a connected tap.

ProsCons
  • Multiple fuel options
  • Initial purchase is affordable
  • Simple design is easy to repair or replace
  • Wasted energy due to standby heating
  • Storage tank can be large/bulky
  • Lifespan shorter than tankless heaters

Fuel Type and Energy Efficiency

Conventional water heaters are most often fueled by natural gas or electricity. Models that utilize natural gas are less expensive to operate. LP and oil-fueled models are also available. Conventional models must meet the new EF (Energy Factor) standard of .62 or above, depending on the tank size and fuel source.

On Demand/Tankless Water Heaters in Pike County

In a tankless unit, water is heated by electric coils or a gas burner as it moves through the heat exchanger.

ProsCons
  • Small size gives more installation options
  • Can last up to twice as long as a conventional model
  • Less wasted energy, only heating minimum amount of water necessary
  • Difficult to heat water for 3+ taps at once
  • Initial investment is higher than conventional models

Fuel Type and Energy Efficiency

Tankless models, like their traditional counterpart, can be fueled by natural gas, LP gas, oil, or electric. These models have an EF standard of .82 or greater.

Solar Water Heater

Using the sun’s natural rays absorbed by roof mounted panels as a power source, solar water heaters in Pike County are the most environmentally friendly option available. Electricity from the power grid acts as a back-up so you never go without hot water.

solar water heater diagram
ProsCons
  • Free to operate, weather permitting
  • Gas or electric is used less often to heat water (backup only), resulting in lower bills
  • Most expensive upfront costs
  • Repairs and maintenance for “extra” parts could be costly

Fuel Type and Energy Efficiency

The SEF (Solar Energy Factor) standard is equal to or greater than 1.2 for a natural gas backup unit, 1.8 for an electric backup unit.

Coil Space Heater/Water Heater Combinations

Combination units use the heat produced by the home’s space heating system and a heat exchanger to produce hot water. Hot water is stored in a tank until there is a call from the tap.

ProsCons
    High efficiency units could lower monthly bills Multiple fuel options
  • Installation is lengthier/more complicated
  • Retrofitting could be costly

Fuel Type and Energy Efficiency

Working in combination with your home’s heating space heating source, both units utilize the same fuel. The EF standards are similar to traditional tank units; however, because most combination heaters are high-efficiency they will likely exceed the rated EF standards.

How To Get the Best Water Heater Contractor in Pikeville, Virgie and Shelbiana

When your home has no hot water, your instinct is to work with the contractor who can get to you the fastest. However, taking just a few minutes to find the pro who asks questions, listens to your answers and educates you on your options will save time, money and headaches.

corroded water heater

You Ask We Answer

How Often Do I Need Service?

Regular inspections and annual flushing can prevent sudden, costly repairs.

It is Making a Lot of Noise But is Still Functioning, Do I Need to Worry Right Now?

This is usually an indication of sediment in the water tank. While you may still have hot water, it is not running as efficiently as it could. Having the tank drained and serviced will improve efficiency and could extend the life of your heater.

Does a Leaking Water Heater Have to be Replaced?

Yes, in most cases a leaking tank means cannot be patched. If a loose fitting is causing the leak however, it might be repairable.

How Long Will My Water Heater Last?

Depending on the model, most will last between 6 and 15 years, though 20 years is not uncommon with regular maintenance and parts replacement.

What Does the Warranty Cover?

This varies by manufacturer, but typically the warranty includes all parts and labor to repair or replace defective parts for the first full year from the date of installation. After the first year, the warranty usually provides coverage for the replacement of defective parts, but does not pay for the labor associated with installing the parts.

Are You Insured?

Liability insurance and workers’ compensation policies protect you from financial obligations stemming from damages or injuries that may occur while a contractor is working on your project. Ask the contractor for a certificate of insurance with you listed as the additional insured (your contractor can obtain this from the insurance agency at no additional cost).

Is a Permit Required For a New Installation?

Yes you need a permit to ensure installation is up to the municipality’s building codes. Aptera installation experts will explain the permit process and obtain the proper permit for you.

Tips for Reducing Your Water Heating Costs

Monthly heating costs can vary greatly depending on the age and model of your water heater, the fuel source used and the amount of hot water you use each day. Reduce waste and your costs by following the guidelines below:

For more details on energy efficiency requirements go to the US Department of Energy www1.eere.energy.gov/buildings/appliance_standards or the PHCC.

Pike County Cities Served

Water Heaters Pikeville, KY

Pikeville Water Heaters Costs:

Pikeville water heater installation costs $1,122, water heater repair costs $657.

Water Heaters Virgie, KY

Virgie Water Heaters Costs:

Virgie water heater installation costs $861, water heater repair costs $504.

Water Heaters Shelbiana, KY

Shelbiana Water Heaters Costs:

Shelbiana water heater installation costs $1,104, water heater repair costs $646.

Water Heaters Phelps, KY

Phelps Water Heaters Costs:

Phelps water heater installation costs $937, water heater repair costs $548.

Water Heaters Belfry, KY

Belfry Water Heaters Costs:

Belfry water heater installation costs $847, water heater repair costs $496.

Water Heaters Raccoon, KY

Raccoon Water Heaters Costs:

Raccoon water heater installation costs $861, water heater repair costs $504.

Water Heaters Mouthcard, KY

Mouthcard Water Heaters Costs:

Mouthcard water heater installation costs $902, water heater repair costs $528.

Water Heaters Ransom, KY

Ransom Water Heaters Costs:

Ransom water heater installation costs $1,024, water heater repair costs $599.

Water Heaters Freeburn, KY

Freeburn Water Heaters Costs:

Freeburn water heater installation costs $1,127, water heater repair costs $660.

Water Heaters Stopover, KY

Stopover Water Heaters Costs:

Stopover water heater installation costs $871, water heater repair costs $510.

41501 | 41502 | 41503 | 41512 | 41513 | 41514 | 41519 | 41520 | 41522 | 41524 | 41526 | 41527 | 41528 | 41531 | 41534 | 41535 | 41538 | 41539 | 41540 | 41542 | 41543 | 41544 | 41547 | 41548 | 41549 | 41553 | 41554 | 41555 | 41557 | 41558 | 41559 | 41560 | 41561 | 41562 | 41563 | 41564 | 41566 | 41567 | 41568 | 41571 | 41572 |

Water Heater Installation in Pike County, KY

Water Heater Installation Pike County, KY

Water Heater Repair in Pike County, KY

Water Heater Repair Pike County, KY

Tankless Water Heater Installation in Pike County, KY

Tankless Water Heater Installation Pike County, KY

Get Pricing on Water Heaters in Pike County, KY

Pike County Water Heater Installation

Water Heater Installation in Pike County

Average Cost: $988
Starting At: $479

Show Less

CityAvg. CostLow CostHigh Cost
Ashcamp $981$567$1,707
Belcher $974$453$1,596
Belfry $847$534$1,675
Canada $1,052$576$1,709
Elkhorn City $875$552$1,504
Fedscreek $988$537$1,465
Forest Hills $1,075$499$1,475
Freeburn $1,127$472$1,398
Hardy $1,049$476$1,492
Hellier $1,121$535$1,428
Huddy $961$483$1,588
Jonancy $938$443$1,472
Kimper $937$552$1,431
Lick Creek $1,061$577$1,588
Majestic $1,063$584$1,676
Mc Andrews $1,004$565$1,751
Mc Carr $1,029$563$1,643
Mouthcard $902$487$1,621
Myra $1,135$511$1,656
Phelps $937$545$1,656
Phyllis $962$469$1,653
Pikeville $1,122$513$1,536
Pinsonfork $1,103$524$1,505
Raccoon $861$586$1,533
Ransom $1,024$509$1,397
Regina $975$439$1,400
Robinson Creek $860$518$1,730
Shelbiana $1,104$573$1,369
Shelby Gap $940$572$1,660
Sidney $1,116$574$1,358
South Williamson $1,113$576$1,683
Steele $975$572$1,396
Stone $975$570$1,399
Stopover $871$533$1,609
Varney $1,028$442$1,570
Virgie $861$453$1,602
Pike County Water Heater Repair

Water Heater Repair in Pike County

Average Cost: $579
Starting At: $132

Show Less

CityAvg. CostLow CostHigh Cost
Ashcamp $575$156$1,268
Belcher $570$125$1,185
Belfry $496$147$1,244
Canada $616$158$1,269
Elkhorn City $512$152$1,117
Fedscreek $578$148$1,088
Forest Hills $630$137$1,095
Freeburn $660$130$1,039
Hardy $614$131$1,108
Hellier $657$147$1,061
Huddy $563$133$1,179
Jonancy $549$122$1,093
Kimper $549$152$1,063
Lick Creek $621$159$1,180
Majestic $623$161$1,245
Mc Andrews $588$155$1,301
Mc Carr $602$155$1,220
Mouthcard $528$134$1,204
Myra $664$140$1,230
Phelps $548$150$1,230
Phyllis $563$129$1,228
Pikeville $657$141$1,141
Pinsonfork $646$144$1,118
Raccoon $504$161$1,139
Ransom $599$140$1,038
Regina $571$121$1,040
Robinson Creek $504$142$1,285
Shelbiana $646$157$1,017
Shelby Gap $550$157$1,233
Sidney $654$158$1,009
South Williamson $652$158$1,250
Steele $571$157$1,037
Stone $571$157$1,039
Stopover $510$146$1,195
Varney $602$122$1,166
Virgie $504$124$1,190
Pike County Tankless Water Heater Installation

Tankless Water Heater Installation in Pike County

Average Cost: $1,168
Starting At: $279

Show Less

CityAvg. CostLow CostHigh Cost
Ashcamp $1,160$331$3,213
Belcher $1,151$264$3,004
Belfry $1,002$311$3,154
Canada $1,244$336$3,217
Elkhorn City $1,034$322$2,832
Fedscreek $1,167$313$2,758
Forest Hills $1,271$291$2,776
Freeburn $1,333$275$2,633
Hardy $1,240$278$2,809
Hellier $1,326$312$2,688
Huddy $1,136$281$2,989
Jonancy $1,109$258$2,770
Kimper $1,108$322$2,694
Lick Creek $1,255$336$2,990
Majestic $1,257$341$3,155
Mc Andrews $1,186$329$3,296
Mc Carr $1,216$328$3,093
Mouthcard $1,066$284$3,051
Myra $1,341$298$3,118
Phelps $1,107$317$3,118
Phyllis $1,137$273$3,113
Pikeville $1,327$299$2,891
Pinsonfork $1,304$305$2,834
Raccoon $1,018$342$2,887
Ransom $1,210$296$2,630
Regina $1,153$256$2,636
Robinson Creek $1,017$302$3,257
Shelbiana $1,305$334$2,578
Shelby Gap $1,111$333$3,125
Sidney $1,320$335$2,556
South Williamson $1,316$336$3,169
Steele $1,152$334$2,627
Stone $1,152$332$2,633
Stopover $1,029$311$3,028
Varney $1,215$258$2,955
Virgie $1,018$264$3,015
Pike County Solar Water Heater Installation

Solar Water Heater Installation in Pike County

Average Cost: $1,205
Starting At: $283

Show Less

CityAvg. CostLow CostHigh Cost
Ashcamp $1,197$335$3,627
Belcher $1,187$268$3,391
Belfry $1,033$315$3,560
Canada $1,283$340$3,632
Elkhorn City $1,066$326$3,196
Fedscreek $1,204$317$3,113
Forest Hills $1,311$295$3,134
Freeburn $1,375$279$2,972
Hardy $1,279$281$3,171
Hellier $1,367$316$3,034
Huddy $1,172$285$3,374
Jonancy $1,144$262$3,127
Kimper $1,142$326$3,041
Lick Creek $1,294$341$3,375
Majestic $1,296$345$3,562
Mc Andrews $1,224$333$3,721
Mc Carr $1,255$332$3,492
Mouthcard $1,100$288$3,444
Myra $1,384$302$3,519
Phelps $1,142$322$3,519
Phyllis $1,173$277$3,513
Pikeville $1,368$303$3,263
Pinsonfork $1,345$309$3,199
Raccoon $1,050$346$3,258
Ransom $1,248$300$2,969
Regina $1,189$259$2,976
Robinson Creek $1,049$306$3,677
Shelbiana $1,346$338$2,910
Shelby Gap $1,146$338$3,527
Sidney $1,361$339$2,886
South Williamson $1,357$340$3,577
Steele $1,189$338$2,966
Stone $1,188$337$2,972
Stopover $1,062$315$3,419
Varney $1,254$261$3,336
Virgie $1,050$267$3,404