Call Now: (866) 928-6611

The Best Water Heater Service in Knox County, IL

Call Now for Water Heater Service:

Water Heaters in Knox County

Lowest Cost Knox County Water Heater Repair & Installation

Aptera's professional, experienced pros can tackle any issue with your water heater in Knox County with quick repairs or replacement units. When your water goes cold, you see discolored water from the tap or hear clanking sounds from your heater, our experts are ready with same day water heater repair in Knox County for both businesses and homeowners. Get started now or read below to see what it takes to become an Aptera partner and learn more.

At one point or another, burned out elements, sediment buildup, faulty thermostats, defective thermocouple, blocked vents, dip tube damage or a broken pressure relief valve will have you calling a repairman. Proper care, maintenance and selecting the right unit for your property all help reduce these occurrences. Aptera phone screened professionals are trained for every type of repair needed for all major brands and are ready 7 days a week.

Call Now for Pricing

Comparing Types of Water Heaters in Galesburg, Abingdon and Knoxville, IL

Recent changes in the National Appliance Energy Conservation Act have increased the energy efficiency standards for residential water heating with gas, oil or electricity—meaning new water heaters will produce hot water using fewer resources. In addition to improvements made to models with conventional water storage tanks, consumers also have solar-powered, tankless, and combination space heater/water heater models to consider.

Conventional Storage Tank Water Heaters

Conventional water heaters act as a holding tank for heated water. Cold water flows into the tank and is heated by the fuel source (usually gas or electric). The water sits in the tank where it is monitored by a thermostat and kept hot until there is a call for it from a connected tap.

ProsCons
  • Multiple fuel options
  • Initial purchase is affordable
  • Simple design is easy to repair or replace
  • Wasted energy due to standby heating
  • Storage tank can be large/bulky
  • Lifespan shorter than tankless heaters

Fuel Type and Energy Efficiency

Conventional water heaters are most often fueled by natural gas or electricity. Models that utilize natural gas are less expensive to operate. LP and oil-fueled models are also available. Conventional models must meet the new EF (Energy Factor) standard of .62 or above, depending on the tank size and fuel source.

On Demand/Tankless Water Heaters in Knox County

In a tankless unit, water is heated by electric coils or a gas burner as it moves through the heat exchanger.

ProsCons
  • Small size gives more installation options
  • Can last up to twice as long as a conventional model
  • Less wasted energy, only heating minimum amount of water necessary
  • Difficult to heat water for 3+ taps at once
  • Initial investment is higher than conventional models

Fuel Type and Energy Efficiency

Tankless models, like their traditional counterpart, can be fueled by natural gas, LP gas, oil, or electric. These models have an EF standard of .82 or greater.

Solar Water Heater

Using the sun’s natural rays absorbed by roof mounted panels as a power source, solar water heaters in Knox County are the most environmentally friendly option available. Electricity from the power grid acts as a back-up so you never go without hot water.

solar water heater diagram
ProsCons
  • Free to operate, weather permitting
  • Gas or electric is used less often to heat water (backup only), resulting in lower bills
  • Most expensive upfront costs
  • Repairs and maintenance for “extra” parts could be costly

Fuel Type and Energy Efficiency

The SEF (Solar Energy Factor) standard is equal to or greater than 1.2 for a natural gas backup unit, 1.8 for an electric backup unit.

Coil Space Heater/Water Heater Combinations

Combination units use the heat produced by the home’s space heating system and a heat exchanger to produce hot water. Hot water is stored in a tank until there is a call from the tap.

ProsCons
    High efficiency units could lower monthly bills Multiple fuel options
  • Installation is lengthier/more complicated
  • Retrofitting could be costly

Fuel Type and Energy Efficiency

Working in combination with your home’s heating space heating source, both units utilize the same fuel. The EF standards are similar to traditional tank units; however, because most combination heaters are high-efficiency they will likely exceed the rated EF standards.

How To Get the Best Water Heater Contractor in Galesburg, Abingdon and Knoxville

When your home has no hot water, your instinct is to work with the contractor who can get to you the fastest. However, taking just a few minutes to find the pro who asks questions, listens to your answers and educates you on your options will save time, money and headaches.

corroded water heater

You Ask We Answer

How Often Do I Need Service?

Regular inspections and annual flushing can prevent sudden, costly repairs.

It is Making a Lot of Noise But is Still Functioning, Do I Need to Worry Right Now?

This is usually an indication of sediment in the water tank. While you may still have hot water, it is not running as efficiently as it could. Having the tank drained and serviced will improve efficiency and could extend the life of your heater.

Does a Leaking Water Heater Have to be Replaced?

Yes, in most cases a leaking tank means cannot be patched. If a loose fitting is causing the leak however, it might be repairable.

How Long Will My Water Heater Last?

Depending on the model, most will last between 6 and 15 years, though 20 years is not uncommon with regular maintenance and parts replacement.

What Does the Warranty Cover?

This varies by manufacturer, but typically the warranty includes all parts and labor to repair or replace defective parts for the first full year from the date of installation. After the first year, the warranty usually provides coverage for the replacement of defective parts, but does not pay for the labor associated with installing the parts.

Are You Insured?

Liability insurance and workers’ compensation policies protect you from financial obligations stemming from damages or injuries that may occur while a contractor is working on your project. Ask the contractor for a certificate of insurance with you listed as the additional insured (your contractor can obtain this from the insurance agency at no additional cost).

Is a Permit Required For a New Installation?

Yes you need a permit to ensure installation is up to the municipality’s building codes. Aptera installation experts will explain the permit process and obtain the proper permit for you.

Tips for Reducing Your Water Heating Costs

Monthly heating costs can vary greatly depending on the age and model of your water heater, the fuel source used and the amount of hot water you use each day. Reduce waste and your costs by following the guidelines below:

For more details on energy efficiency requirements go to the US Department of Energy www1.eere.energy.gov/buildings/appliance_standards or the PHCC.

Knox County Cities Served

Water Heaters Galesburg, IL

A & J Sales & Service

738 Mulberry St
Galesburg, IL 61401

Neil Thomas Plumbing & Heating

Po Box 269
Galesburg, IL 61402

Galesburg Water Heaters Costs:

Galesburg water heater installation costs $1,060, water heater repair costs $620.

Water Heaters Abingdon, IL

Abingdon Water Heaters Costs:

Abingdon water heater installation costs $888, water heater repair costs $520.

Water Heaters Knoxville, IL

Knoxville Water Heaters Costs:

Knoxville water heater installation costs $852, water heater repair costs $499.

Water Heaters Dahinda, IL

Dahinda Water Heaters Costs:

Dahinda water heater installation costs $1,135, water heater repair costs $664.

Water Heaters Gilson, IL

Gilson Water Heaters Costs:

Gilson water heater installation costs $1,131, water heater repair costs $662.

Water Heaters Wataga, IL

Wataga Water Heaters Costs:

Wataga water heater installation costs $1,007, water heater repair costs $590.

Water Heaters East Galesburg, IL

East Galesburg Water Heaters Costs:

East Galesburg water heater installation costs $893, water heater repair costs $523.

Water Heaters St. Augustine, IL

St. Augustine Water Heaters Costs:

St. Augustine water heater installation costs $1,045, water heater repair costs $612.

Water Heaters Oneida, IL

Oneida Water Heaters Costs:

Oneida water heater installation costs $892, water heater repair costs $522.

Water Heaters Yates City, IL

Yates City Water Heaters Costs:

Yates City water heater installation costs $1,140, water heater repair costs $668.

A & J Sales & Service

738 Mulberry St
Galesburg, IL 61401

Neil Thomas Plumbing & Heating

Po Box 269
Galesburg, IL 61402
61401 | 61402 | 61410 | 61414 | 61428 | 61430 | 61436 | 61439 | 61448 | 61458 | 61467 | 61472 | 61474 | 61485 | 61488 | 61489 | 61572 |

Water Heater Installation in Knox County, IL

Water Heater Installation Knox County, IL

Water Heater Repair in Knox County, IL

Water Heater Repair Knox County, IL

Tankless Water Heater Installation in Knox County, IL

Tankless Water Heater Installation Knox County, IL

Get Pricing on Water Heaters in Knox County, IL

Knox County Water Heater Installation

Water Heater Installation in Knox County

Average Cost: $855
Starting At: $467

Show Less

CityAvg. CostLow CostHigh Cost
Abingdon $888$538$1,568
Altona $1,124$481$1,422
Dahinda $1,135$524$1,626
East Galesburg $893$561$1,682
Galesburg $1,060$524$1,436
Gilson $1,131$520$1,423
Henderson $961$477$1,754
Knoxville $852$571$1,591
Maquon $1,064$438$1,783
Oneida $892$523$1,430
Rio $1,138$570$1,644
St. Augustine $1,045$545$1,533
Victoria $1,141$557$1,347
Wataga $1,007$514$1,801
Williamsfield $904$446$1,638
Yates City $1,140$546$1,632
Knox County Water Heater Repair

Water Heater Repair in Knox County

Average Cost: $501
Starting At: $128

Show Less

CityAvg. CostLow CostHigh Cost
Abingdon $520$148$1,165
Altona $658$132$1,056
Dahinda $664$144$1,208
East Galesburg $523$154$1,249
Galesburg $620$144$1,067
Gilson $662$143$1,057
Henderson $562$131$1,303
Knoxville $499$157$1,182
Maquon $623$120$1,324
Oneida $522$144$1,062
Rio $666$157$1,221
St. Augustine $612$150$1,139
Victoria $668$153$1,000
Wataga $590$141$1,338
Williamsfield $529$123$1,217
Yates City $668$150$1,212
Knox County Tankless Water Heater Installation

Tankless Water Heater Installation in Knox County

Average Cost: $1,011
Starting At: $272

Show Less

CityAvg. CostLow CostHigh Cost
Abingdon $1,049$314$2,952
Altona $1,329$280$2,677
Dahinda $1,341$306$3,060
East Galesburg $1,055$327$3,167
Galesburg $1,253$306$2,704
Gilson $1,336$303$2,678
Henderson $1,136$278$3,303
Knoxville $1,007$333$2,995
Maquon $1,258$255$3,357
Oneida $1,055$305$2,692
Rio $1,345$332$3,095
St. Augustine $1,235$317$2,885
Victoria $1,349$324$2,535
Wataga $1,190$299$3,390
Williamsfield $1,069$260$3,084
Yates City $1,348$318$3,073
Knox County Solar Water Heater Installation

Solar Water Heater Installation in Knox County

Average Cost: $1,043
Starting At: $276

Show Less

CityAvg. CostLow CostHigh Cost
Abingdon $1,082$318$3,332
Altona $1,370$284$3,022
Dahinda $1,384$310$3,455
East Galesburg $1,088$331$3,574
Galesburg $1,292$310$3,052
Gilson $1,379$307$3,023
Henderson $1,171$282$3,728
Knoxville $1,039$337$3,381
Maquon $1,298$259$3,789
Oneida $1,088$309$3,038
Rio $1,387$337$3,493
St. Augustine $1,274$322$3,257
Victoria $1,391$329$2,861
Wataga $1,228$303$3,827
Williamsfield $1,102$264$3,481
Yates City $1,390$322$3,469